Revesible carried ploughs of SUKOV type Downhil Vario are intended to ploughing of lands without plough up and folds on plain lands and slopes up to 10 with folding of furrow slice against the slope. They are suitable behind tractors 60-128KW (80 – 180HP).
This type of plough is characterized by the fact that it is possible to fluently change the width of engaging by means of the hydraulic roller.
Option to equip with swath board PS40, which is characterized by low resistance during ploughing.
The plough is fitted with deep overturning by wheel and it may be optionally fitted with roller coulters in toothed and shoe-type variants, with skimmers and with back-fillers for plant remainders. The plough-shares may be fitted with set wings of swath boards, which enable perfect turning of the furrow slice at larger operating cut of the plough-share.
Ploughing depth can be continuously changed by control screw. The rolling coulters can be adjusted in height and laterally, too. The plough-shares are protected against overloading by bolt, which breaks on entry to the obstacle. The plough is reversed by hydraulic roller by means of hydraulic automatic roller reversing, which is controlled by lever from tractor hydraulic external circuit. The first-share cut adjustment elements for the total cut and plough depth are easily controlled. Lateral adjustment of the plough is performed by two adjustable limit screws. The stability of the plough at rest is ensure by tilted support.
|Span between bodies [mm]||1000||1000||1000|
*Weight of ploughs without accessories.
Swath board: KV09, LM35, LM40, UN40
Separating flange of the plough
Protection by bolt
Frame 140x140x10 mm (4+, 4+1)
Hydraulic cylinder with automated unit for turning
Hydraulic change of gearing per 1 body: 33-53 cm
Frame 120x120x10 mm (2+, 3+, 3+1)
Height under the frame: 800 mm
Swath board strip, model PS40
Skimmer, type S
Rolling coulter Ø 480
Back-filler for plant remainders
Skimmer, type K